The VI module amplifies one LTC or one IRIG-B signal to six equal outputs. In case of a faulty signal output, a seventh amplifier can be switched to one of the six distributing ports.
- Download PDF
Module System Diagram
Module Control Panel
RUBIDIUM H1 VI module rear view
RUBIDIUM H1 VI module front view
- Four built-in amplifiers
- 1:4 Distribution of LTC, Serial and Telegram Signals
- Two RS232 Outputs
- Four RS422 Outputs
- Compatible with Alpermann+Velte's MTD signal
The backlit keys on the front of the module can be individually configured with the included software. The setup (configuration) of the module is made using a PC via the USB or Ethernet port (optionally).Example of a LTC distribution system, 12 outputs
Example of a redundant IRIG-B distribution system, 18 outputs
In order to ensure a fail-safe operation all signals are monitored. In the event of an error, the appropriate output is switched to the reserve amplifier. The changeover is programmable as follows:
Available functions can be selected by configuration over the housing’s USB interface. If a RUB IE Ethernet module is on hand, configuration can also be made via a standard web browser.
- Immediately (automatically)
- At a specified time (automatically)
- Manually (by pushing one of the programmable keys)
A status monitor can be accessed at any time. SNMP is available in combination with an IE module.
Product Model ID: RUB VI Module description Distribution module 1:6 LTC or IRIG-B with output monitoring and a redundant change-over switcher RUBIDIUM series 1 & 3 Distribution Module